You are currently viewing 018 Cabinet Sizes

018 Cabinet Sizes

Comparing sizes of the most popular models

In order to provide some context as to the size of the Dana-Ridge wetblast cabinets available, we have placed a common 14″ wheel rim on the turntable of the three most popular machines in our range (there is also the optional side extension unit or side airlocks should you require  extra room for long or awkward shaped parts).

Note: Wheel rims are measured inside lip to inside lip of the rim so although this is a standard 14″ (381mm) rim the measurement in the picture is 15.35″ (390mm)

vapor blast machines

Turntable Sizes

The Mercury and Comet machines both have 500mm dia. turntables that can take up to 50kg centrally located loads. The Mars machine has a 700mm dia. turntable that can take up to 200kg centrally located.

Once you get into the big units such as the Titan and Saturn ranges the turntables can hold 750kg and up and start at 1240mm, depending on your requirements.

In this photo you can see the 500mm and 700mm blast-resistant turntables with the 390mm dia. wheel rim behind them for reference.

Mercury

The Mercury is the entry level unit in our commercial range of machines with a small footprint and flip-top lid, it is useful if space in your workshop is limited. 

  • Turntable 500mm dia.
  • INTERNAL DIMENSIONS
    • Height above turtable = 620mm
    • Depth (front to rear) = 670mm
    • Width = 680mm
  • EXTERNAL DIMENSIONS
    • Overall height = 1760mm
    • Depth = 1020mm
    • Width = 910mm

 

  • NOTE: Allow an extra 300mm space from the wall at the back to allow for lid opening and maintenance.
Mercury vapour blast interior

Comet

A very popular unit as it combines the versatility of a single phase 240V unit with a good sized cabinet. Can even be modified to accept more awkward parts with a side extension unit.

  • Turntable 500mm dia.
  • INTERNAL DIMENSIONS
    • Height above turtable = 730mm
    • Depth (front to rear) = 900mm
    • Width = 890mm
  • EXTERNAL DIMENSIONS
    • Overall height = 1970mm
    • Depth = 1230mm
    • Width = 1000mm with door closed (1770mm with door open)

 

  • NOTE: Allow an extra 300mm space from the wall at the back to allow for maintenance.

Below: 14″ wheel rim inside the Comet machine with its 500mm dia. turntable

Comet vapour blast interior

Below: Comet machine with optional side extension unit

Comet side unit
side extension unit

Mars

A very popular unit as it combines a generous size with a powerful 4kW motor and a large turntable that can hold a whopping 200kg.

It can even be modified to accept more awkward parts with a side extension unit.

  • Turntable 700mm dia.
  • INTERNAL DIMENSIONS
    • Height above turntable = 920mm
    • Depth (front to rear) = 1030mm
    • Width = 1050mm
  • EXTERNAL DIMENSIONS
    • Overall height = 2040mm
    • Depth = 1680mm
    • Width = 1160mm with door closed (2000mm with door open)

 

  • NOTE: Allow an extra 300mm space from the wall at the back to allow for maintenance.

Below: 14″ wheel rim inside the Mars machine with its larger 700mm dia. turntable

Mars vapour blast interior

Below: Mars machine with optional side extension unit

side extension exterior Mars

Titan

A step up in size and capability with a powerful 11kW motor and multi-gun capacity. It has a 1240mm dia. turntable and a load capacity of 750kg (option of increasing to 1000kg).

  • Turntable 1240mm dia.
  • INTERNAL DIMENSIONS
    • Height above turntable = 1080mm
    • Depth (front to rear) = 1660mm
    • Width = 1500mm
  • EXTERNAL DIMENSIONS
    • Overall height = 2520mm
    • Depth = 2120mm
    • Width = 1500mm with door closed (2750mm with door open)
    • Width incl. side station 3300mm

 

  • NOTE: Allow an extra 300mm space from the wall at the back to allow for maintenance.

Below: Operating the large Titan machine with its 1.2m diameter turntable and load capacity of 750kg.

Below: Semi-automatedTitan interior

Titan turntable

Machine videos

These standard machines are able to be modified to suit a range of applications and if you need something custom-built talk to us here at Dana-Ridge 

Get in Touch now